According to a famous architect, “The front door is the gateway to an individual’s lifestyle and their habits, which includes cleaning and maintenance.” Refurnishing the entrance is necessary if you want to sell your premises, enhance the look and feel of the interior, or ensure a safe and hygienic environment for residents, especially kids and the elderly.
Steps in Refinishing a Front Door
Prep Work
Prior to painting the door, it needs to be cleaned, sanded, patched (where required), primed, and painted. Ensure that the crevices and holes are covered properly before the colored layer is applied.
Read More
Importance of Los Angeles Hardwood Floor Refinishing Service
How to Disinfect Corona Virus From Flooring in Your Home?
What to Expect from Professional Hardwood Company in Post Corona Era?
Remove Door
The best door paint job is done on sawhorses: Remove the door from the hinges and lay it flat. It’s best to paint the door in a horizontal manner to reduce dripping. Moreover, the hinge side and bottom edges are also covered fully.
Apply Primer
If your door is raw (not painted) or you want a color change, apply a coat of primer and let it dry completely. Primer helps the paint to adhere properly. Moreover, it provides a more even finish.
Tape and Protect
Use painter’s tape to carefully tape off areas you want to protect, such as the door frame, windows, and hardware. Ensure the tape is applied neatly.
Paint the Door
Now comes the exciting part – painting the front door. Start by applying a thin, even coat of paint with your brush. Begin in the recessed areas or panels. Afterwards, paint the flat surfaces. Work from the door top to the bottom edge. Allow the coat to dry before applying a second layer. Depending on the paint, you will need multiple coats for complete coverage.
Drying Time
Patience is key when painting a front door. Allow each coat to dry fully; this process takes several hours or even days to complete.
Reattach Hardware
Once the final coat is dry, reattach any hardware that you removed or taped off.
Remove Tape and Clean Up
Carefully remove the painter’s tape while the paint is still tacky to ensure clean lines. Dispose of the drop cloth and clean the brushes accordingly.
Read More
Top 8 Best Trendy Designs Used for Hardwood Flooring in California
Steps to Help Prevent Seasonal Gaping for Hardwood Floors in California
Top 10 List for Flooring Lumber in Orange County
Material Requirement
Paint
Choose a high-quality exterior paint of your choice. Opt for paint formulated for doors or trim; it will be long-lasting and attractive.
Paintbrushes
With regards to the type of paint, invest in a good-quality brush. A 2-inch angled brush is ideal for most front doors.
Painter’s Tape
Use painter’s tape to protect the areas around the door, such as the trim and hardware, from accidental paint splatters.
Drop Cloth
Lay a drop cloth or old bedsheet under the door to reduce additional cleaning work.
Sanding Materials
Sandpaper or a sanding block is required to smooth the door’s surface, especially if it has imperfections or previous layers of paint.
Tack Cloth
A tack cloth is handy for removing dust and debris from the door’s surface.
Primer
If your door has never been painted, a primer may be necessary to ensure proper adhesion and coverage.
Conclusion
Stand back and admire your front door! It should look rejuvenated and attractive for the onlooker. Don’t forget to let it cure before subjecting it to heavy use or contact. With the right materials, a little patience, and attention to detail, you can achieve professional-looking results that will impress guests and passersby alike.
For more information on painting doors, contact Flooring and Refinishing Guru, one of the best companies in the USA. Our experts are recognized for pertinence and safety. Use of proper PPEs and cleanliness are our top priorities when applying paint in homes and offices.