The parquet floor is a symbol of glamour and luxury. It is also one of the expensive flooring solutions you can have for your home. As time goes on, your flooring becomes old and losses its appeal, this leads to the thorough job of refinishing a parquet floor.
In this blog, we will explain in step by step method how to perform refinishing a parquet floor and to ensure that the parquet floor reappears to its original state after the work is finalized.
Floor preparation
As for every other flooring job, the work of refinishing a parquet floor starts with preparation. This means to get all tools and machines used for refinishing purposes.
Also, the preparation includes dusting off your floor and making it clean so that no debris is laying over the surface.
The cleaning should be done with the help of a mop or simply by any dust cloth. It is important because, during the sanding process, any particles of dust or debris should not meet the machine.
Read More
Best tips to use hand scraper for hardwood floors
The question to ask wood floor refinishing services before hire
How to repair hardwood flooring from water damage?
Look for damaged areas
Because most of you will be working to fix the old parquet floor, there’s a possibility that it has been damaged in various places.
To begin with, refinishing a parquet floor, the damaged areas need to be readily examined. Also, as a tip to find hollow wood inside the flooring, tap at the floor at each block so check whether any floor is damaged at the bottom end.
Once you go with the examination, it’s important to mark them so that you can recover the damaged floor using a floor jack and pull bars.
Remove underfloor
The most annoying part of refinishing a parquet floor is removing the underfloor. This is because the underfloor is being filled with bitumen solution, which was used to attach the parquet floor way before.
Because pulling out the damaged parquet floor might make the underfloor uneven, we need to scrap all material out from the underfloor so that the leveling becomes even.
After the leveling is done, which might take some time, place back the parquet floor back to their place, along with a new parquet floor replacing the damaged ones. Make sure the size is to the right section as it will slide easily in the place of old floors.
Place everything back
There are two ways you can place the parquet floor back to its original place. One way is to use an adhesive that sticks the floor against the underfloor, while another option is using a nail gun to attach the floor properly.
Either way is doable, although the adhesive solution is quite expensive because a lot of solutions need to be used so that the entire floor is covered.
Using bitumen is not advised, because using bitumen without mess is almost impossible, hence it’s important that for proper refinishing a parquet floor, having adhesive to place everything back to its original places is to be ensured.
Start with sanding
After repairing work is finished, it’s time for the sanding processes to begin. The main crux of refinishing a parquet floor lies in the quality of the sanding process.
In the end, what people need is to see their parquet floor look new. This is only possible if even a level of sanding is processed by using fine grits over the floor.
Although there might be some floor that has become more uneven than before, that sanding grits must be adjusted so that the new floor is evenly tuned so proper refinishing a parquet floor is carried out.
Read More
Why wood floor repairs are needed every year?
Steps involved in hardwood floor repair using refinishing
Importance to hire professional wooden floor installation team in Southern California
Fill gaps
During placing the hardwood back to its place, there might be some gaps left in between the parquet planks which need to be filled properly.
As filling gaps, there’s nothing definite. People use different methods so that gaps are filled. One way and cost-effective way is to fill the gaps using sawdust and filler resin so that during the staining process, the color of sawdust comes the same as the entire floor.
As the sanding process is done multiple times, it’s important to work on your refinishing a parquet floor through the sand drummer and buffing machine multiple times so that all the gaps are perfectly filled and combined thoroughly.
Finishing work
After the sanding work is completed and resin is applied over the floor, the last touch is needed to repair the same beauty of the original parquet floor over your house.
Cleaning any dust off from the floor and shine it using a waterproof coating such as polyurethane, so that it gets necessary protection for water spills and such.
Want to hire a professional company for refinishing a parquet floor in Southern California?
The professional experts in the work of refinishing a parquet floor ensure that the result is up to your liking.
If you are looking for an advanced company for refinishing a parquet floor, simply contact Flooring and Refinishing Guru to have a complete work of your flooring job.