Things you need to know about Hardwood Flooring and Refinishing

hardwood refinishing

Things you need to know about Hardwood Flooring and Refinishing

Refinishing hardwood floors is a necessary task as it retains the texture and design of the floor. In addition, it also increases its useful life with a protective coating that keeps away slippage and any accidental occurrences. Refinishing floors costs a lot cheaper than replacing it with a new surface.

Here are some pointers for you to know about hardwood flooring.

  1. Cleaning of Floors

Restoring dull hardwood floors is a viable option but giving it a good clean can ultimately restore its gloss. The floor is also protected with a layer that saves it from erosion and scratches from dust and other particulates. The cleaning process entails sweeping, vacuuming and mopping with concentrated cleaners. Lastly, this job is lengthy and labor-intensive.

  1. Prepping the Floor

At first, you will need to clean the floor and remove anything present on it, including dust and debris. Ensure that the room is cordoned off so no dust spreads through the premises. Check all vents, doorways, and electrical outlets are covered. Lastly, thoroughly sweep and mop the floor to clean it before refinishing.

  1. Sanding and Refinishing

Quality hardwood floors may be sanded and refinished up to ten times before they need to be replaced, for your knowledge. People often wonder if they can refinish a floor without sanding it. But frankly, if floors are not sanded, the staining doesn’t penetrate the hardwood – nor will the polyurethane adhere properly. For example, if the floors are damaged, a more vigorous sanding tool may be necessary to smooth them out. If you find gaps between the boards before the process begins, those gaps will remain until the service is completed; however, minor gaps may improve with refinishing.

It’s also important to keep in mind that the boards are likely to have color variations and knots. Although the wood floor color trends may not be visible until after the polyurethane has been sprayed, they will certainly bring out the floor’s distinctiveness and beauty. The powdered dust will be allowed to settle on the floor from the air after sanding, and then vacuumed off before dry-tacking the floor using soft microfiber cloths.

Read More

https://flooringandrefinishingguru.com/top-8-best-trendy-designs-used-for-hardwood-flooring-in-california
https://flooringandrefinishingguru.com/steps-to-help-prevent-seasonal-gaping-for-hardwood-floors-in-california
https://flooringandrefinishingguru.com/how-top-hardwood-floors-companies-calculate-the-cost-for-the-work
https://flooringandrefinishingguru.com/how-top-hardwood-floors-companies-calculate-the-cost-for-the-work

  1. New Color Placement

When a hardwood floor begins to show signs of wear and tear, it should be refinished. You want to make sure your floor looks great after all that work and effort. It is preferable to delegate the task to specialists. You have the option of significantly changing the appearance of the floor by sanding it down to its natural condition and applying a new color. Some individuals like hardwood floor colour stains because they feel they enhance the wood’s natural hue. You might not be able to obtain the precise hue you want since hardwood darkens with age; however, hardwood floors can be made darker or lighter. Seek guidance from a professional on this.

  1. Repaint Baseboards after Hardwood Refinishing

The baseboards are scuffed up from sanding and refinishing, and you’ll need to stain and poly them before applying paint. Steps, stair risers, stringers, and spindles are all in the same boat. There may be gaps where the paint on the trim is gone if the carpeting was removed from the floor. If you decide to replace baseboards, keep in mind that they must be removed before refinishing the floors and reinstalled afterward. Experts in the field of flooring know how to do things in the right order.

  1. Apply Polyurethane

Now, a polyurethane coat can be applied. You can remove finishes from a floor using a stripper can require extra safety precautions because of the high chemical content.  There are numerous benefits of choosing urethane; it is better, safer and dries faster and a professional flooring service can do a better job at this.

Conclusion

Taking care of hardwood flooring and doing refinishing processes is a safe and viable option to render a long life and keep it safe for users. The scratches and marks also get covered through and you can have a lustrous shine over it. This enhances anti-slipping properties to the floor and becomes a hygienic surface for pets and children.

If you want to know more about our services, then visit (https://flooringandrefinishingguru.com/)

Leave a Reply

Your email address will not be published. Required fields are marked *